• Contact Us 24/7
  • 0488 885 201
  • How Hot Water Systems Work?

    water heater functions

    There are many appliances and innovations that provide comfort and luxury to a home. One of those is a water heater. What makes this appliance so fascinating is that the mechanisms are so complex that it demands a specific people to do any repairs and replacements in it whenever it experiences damage. This is a precautionary measure that will hope to prevent homeowners and thrifty do-it-yourselfers from tinkering and destroying the machine. In order to get to know the water heater better, you must learn its parts and functions first hand. In this article, you will learn exactly just that. Here is a swift rundown on the process and how the water heater functions:


    • Storage

    The first step in the processing of a water heater is to make sure that it actually has water to heat up. There are water heating models that need a certain amount of time to accumulate the water inside a tank and then another few minutes to heat them. As the water enters the tank, they are heated through heating coils strategically positioned at the bottom of the tank near the supply pipe to make sure that he water near the rim is already insulated and hot while the water entering the tank receives the same treatment. The process goes on and on as long as there is consumption or demand for hot water.

    A thermostat is utilised to keep the temperature of the water in control. This is to make sure that the water coming out of the pipe does not get too cold and does not burn you either. It is also responsible in regulating the amount of fuel that is delivered to the tank for heating.

    Toxic emissions are then wired from the burner to exhaust pipes that lead out of the building. There are some tanks and water heaters that have fan assisted vents to carry the byproduct of water insulation.


    • Reload

    As the water makes its way from the tank and into connecting pipes that lead to the tap, the tank refills through the diffuser tube at the bottom of it and is heated through the heating coils under the tank.

    With so much process it undergoes, the corrosive properties of the water that comes in the form of minerals and sediments are put under control by using anode rods.

    An anode rod is made out of aluminium or magnesium and functions as mineral bait. It attracts the minerals and other nourishments carried by the water and trap them so they do not get released into the tap. The idea is that there will be two types of metals are submerged into the water and the other goes by protecting the reactive metal. That is what happens to the rod. Keep a close eye on your sacrificial anode rod since it will constantly need replacement.


    • Release

    All that is done, then by the time you open your tap, there will be freshly heated water at your disposal. Remember that the amount of time a water heater is able to heat up the water supply is dependent on the amount of water there is to be heated as well as the type of water heater that you are using.